Exaro Studio logo

Asset details

Motor Grader (Drivable, Live Cockpit, Rigged & Animated)

A drivable 15-tonne articulated motor grader with a live cockpit and every function a real grader has: a 3.66 m moldboard that raises, tilts, swings on its toothed circle and side-shifts, front wheels that steer and lean, frame articulation, two rocking tandems (six wheels) and a three-shank rear ripper. Every ram is solved and fed by its hoses, the engine bay is see-through to the engine and radiator, and the display, steering wheel, pedals and eight blade levers move with the controls. Playable in Unreal Engine 5.5 to 5.8; rigged FBX and GLB for other engines.

A game-ready construction hero asset: a 15-tonne class articulated motor grader in construction yellow, unbranded, built as a working machine you can drive and grade with.

It is playable out of the box. Walk up, press E and you are in the seat. W and S drive, brake and reverse; A and D steer the front wheels. The blade is on keys as it is on levers: I and K raise and lower it, J and L tilt it (one end up), Z and X swing it on the circle, N and M side-shift it along its rails, R and F lean the front wheels, Q and C articulate the frame, and Y and H put the ripper in and out of the ground. U switches the work lamps, V swaps between the chase camera and the operator's seat, and E gets you out again when you have stopped. In Unreal Engine 5.5 to 5.8 it comes as a drive pawn on a ready work site; for other engines the rigged FBX and GLB carry every clip.

The blade works the way a real grader's does. The drawbar hangs from a ball under the nose and carries the circle, a toothed ring turned by its own pinion and motor in clamping shoes; the moldboard hangs under the circle on its rails and slides along them on a side-shift ram. Two ball-jointed lift rams from the saddle on the frame's arch raise the blade and, working against each other, tilt it. The blade swings 40 degrees each way, side-shifts 0.62 m each way and tilts 8 degrees, and every ram is solved each frame, so nothing slides or comes apart.

The front axle oscillates on its pin, and its wheels steer on king pins and lean on their own pins, tied by a tie rod and a lean bar, on crossing steering rams and a lean ram; the axle rocks as the wheels lean so both tyres stay on the ground. The frame articulates 22 degrees each way under the cab on two rams. Behind, each side's two wheels ride a rocking tandem box, and the machine rolls on its three pivots as a tandem climbs a bump. The rear ripper is a parallelogram toolbar with three shanks, raised and lowered by two rams.

The hood is sheet steel round a real engine bay: through the louvred side openings you see the six-cylinder diesel on its mounts, its exhaust riser and intake, and through the perforated rear grille the radiator core with its fan and hoses. Every ram has its two hoses to a line block.

The cockpit is live. The instrument display is drawn by a shader from the machine's state, not swapped pictures: F, N or R and the gear, ground speed, an RPM bar, coolant, transmission oil, hydraulic oil and fuel gauges, and labelled warning lamps. The steering wheel turns with the steering, the pedals go down, the F-N-R lever moves, and each of the eight blade levers rocks with its function.

You can climb in: a ladder and landing each side up to a door that opens, on a cab glazed on every side for the view of the blade. Inside: a suspension seat, a steering column with the display pod, pedals, the two lever banks, see-through glass all round, with mirrors, work lamps and a beacon outside.

The paint carries weathering with causes, baked into the textures: spoil caked low and splashed off the tyres, the moldboard's face polished by the soil, a bright worn cutting edge and ripper tips, grease at every pin and ball, chipped push plate, blade ends and counterweight, boot-worn treads, dust on the flats, and safety placards, a data plate and push-plate stripes.

Clips: Drive, SteerLeft, SteerRight, BladeRaiseLower, BladeTilt, CircleTurn, BladeSideShift, SteerLeanArticulate, RipperDown, TandemRock, DoorOpen and DoorClose each side, plus the cockpit's own clips (blade lift and tilt, circle, side-shift, articulation, lean and ripper) that the live cockpit plays by its controls.

Includes FBX (skeletal mesh plus one FBX per clip), a GLB with every clip embedded, baked colour, normal, roughness and emission maps baked from the full-detail model, and LODs.

Unreal Engine: the download includes a ready-to-open Unreal project for UE 5.5, 5.6, 5.7, 5.8 and 5.9, the same projects Fab buyers get, with the meshes, materials, Blueprints and a demo map set up, alongside the FBX and GLB.

  • motor grader
  • grader
  • road grader
  • blade
  • moldboard
  • road construction
  • heavy equipment
  • construction
  • construction site
  • earthmoving
  • hydraulic
  • drivable
  • playable
  • vehicle
  • live cockpit
  • interior
  • hero asset
  • rigged
  • animated
  • game ready
Type
3D Assets
Category
Vehicles
Price
$59.99 USD, one-time
Formats
FBX per package · GLB per package and LOD · Textures · Unreal importer · Unreal project
Works with
Unreal Engine 5.5–5.9 · Unity · Godot
Rig
Mechanism rig, one bone per moving part; the blade lift, side-shift, steering, lean, articulation and ripper rams solved per frame; the tandems and front axle rocking; cockpit controls driven live
Creator
Hawke Originals
Updated
November 2026