Five-Piece Drum Kit (Playable: UE5 Mannequin Drummer, Sticks, Kick & Hi-Hat Pedals)

A game-ready five-piece drum kit, set up round the throne the way a drummer plays it: snare between the knees, hi-hat tight on the left with its pedal under the left heel, rack toms low over the kick just past the snare, floor tom at the right knee, crash high over the hi-hat and ride over the floor tom. No stand leg runs over a pedal.

The kit: a 22 x 18 inch kick drum with wood hoops, chrome claw hooks and spurs, a chain pedal on a sprocket cam, and a black front head with a printed badge; a 14 x 5.5 inch steel snare with throw-off, butt plate and wires, in a basket stand; 10 x 8 and 12 x 9 inch rack toms on a double holder over the kick; a 16 x 16 inch floor tom on three bent legs with memory locks; a 14 inch hi-hat pair on a double-braced stand; a 20 inch ride and an 18 inch crash on boom stands with counterweights; and a round padded throne. The shells wear a cherry sunburst over figured wood under a piano-gloss coat. The heads are played in, with stick marks round the strike zones and a beater patch on the kick. The cymbals are lathed bronze with tonal grooves, light hammering and a darker edge, each a little out of true. The hardware is split into polished chrome, plated steel and cast alloy, no two parts alike, with wear where a player's hands and feet go.

What moves: the kick pedal drives its felt beater into the batter head (the footboard, chain and beater move in step); the hi-hat pedal pulls the top cymbal down onto the bottom one; the ride and crash rock on their felts when struck and settle.

Clips: Kick, HiHatChick (press and release), HiHatClose, HiHatOpen, RideHit and CrashHit, plus four kit loops a seated drummer plays over (Ready, Groove, Fill, CrashBeat: the kick pedal on the beat with the hi-hat held closed).

Playable with the UE5 Mannequin: four seated drummer loops (Ready, Groove, Fill, Crash) on SK_Mannequin. His right foot works the kick pedal and his left holds the hi-hat closed, in time with the kit's own Groove/Fill/CrashBeat clips; a separate DrumSticks rig carries both sticks with a matching clip for each loop, so the sticks stay in his hands on a stock Manny with no sockets to set up. Snare strokes land within 0.5 cm of the snare's strike point (measured from the shipped files). DrummerSetup.json says where to place each piece and which clips play together.

Sockets mark where a drummer's sticks land and feet press, so you can drive your own player: strike points on the snare, both rack toms, floor tom, hi-hat, ride and crash (the cymbal ones move with the cymbals), the kick and hi-hat footboards, and the throne seat.

Nine separate skinned meshes, one per piece (KitKick, KitSnare, KitTom10, KitTom12, KitFloorTom, KitHiHat, KitRide, KitCrash, KitThrone), about 660,000 triangles in all at full detail, each with its own baked 4K colour, normal and roughness maps. Move, rotate or leave out any piece. KitKick carries a socket_place_* socket for every other piece, so dropping each one on its socket rebuilds the kit exactly as shown. Each piece ships as FBX (skeletal mesh plus one FBX per clip for Unreal) and GLB with its clips embedded.

• drum kit
• drums
• drum set
• kick drum
• snare
• tom
• hi-hat
• cymbal
• ride
• crash
• musical instrument
• music
• band
• stage
• rock
• rigged
• animated
• game ready
• drummer
• ue5 mannequin
• animation